Copyright: WinTrasher V1.0 (C)The Master / Silents Denmark!
Citation: WinTrasher


Windows Graphical User Interface (GUI)
”Boot Into Windows Graphical User InterFace”

Booting into “Windows Graphical UserInterface”, means that you automaticly start windows, when you power on your computer!

This can be disabled, by unchecking this box. You will then boot into MSWindows Dos! This is an nice option if you often work in a pure DOS.. Grayed=Default Value!


Registry Autostartup
”Registry Startup”

When Win95 is launched it sometimes run a few startup files. These were usually placed in the Win.ini file, but now the option is also available directly from Windows. Here you can create new entries and delete obsolete ones aswell!


Windows Password list
”Windows Passwordlist”

When a new user logs on to your station, he will be prompted for a password. These passwords are saved in a password file. After some time you might have a lot of passwordfiles laying around, so here is the option to get rid of them!


StartMenu Enhancements
“Start Menu Enhancements”

You can place the following Win95 items for directly and fast access on your startmenu!

1. 	The Control Panel

2. 	The Printers Folder

3. 	The Dial-Up Networking

When placed here, you can access the information, without opening them first. Simple And Easy


Windows Graphical System Files
”Windows Pictures”

Windows uses 3 default pictures.

1. 	When booting.

2. 	When closing down.

3. 	When it’s ready to be shut off!

Click the “Change” to insert your own picture, and restore to restore the originals!

Be warned, that the image you chose must be 320*400 in 256 colors. The Image will then be streched to 640*480 automaticly!


Multi/Dual Boot
”Enable Multi Boot”

When starting Windows95, you can enter a bootup menu. This boot can be activated so you can select various bootup methods! To enable dual/multi-boot capabilities, check this box, and you will be able to start MS-DOS by pressing F4 or by pressing F8 to use the Windows Startup menu. Grayed=Default!


Safe Mode Startup Warning
”Enable Safe Mode startup Warning”

Enables the Safe Mode startup warning. Grayed=Default!


KBoot Settings$Enable Startup Options Keys
”Enable Startup Option Keys”

Enables the startup option keys (that is, F5, F6, and F8). If the function is disabled it will override the bootdelay, and prevent any startupkeys from functioning. This setting allows system administrators to configure more secure systems. Grayed=Default!


Startup Delay
”Startup Delay”

Sets the initial startup delay in seconds. The default value is 2. If the startupkeys are disabled this delay is automaticly disabled! The Default value = 2.


Automatic Display Of Windows95 Startmenu
”Automatic Display Of Windows95 Startmenu”

Enables automatic display of the Windows 95 Startup menu; so that the user must press F8 to see the menu. Checking this,  eliminates the need to press F8 to see the menu. Grayed=Default!


Safe Mode For System Startup
”Safemode For System Startup”

Enables Safe Mode for system startup. (This setting is enabled typically by equipment manufacturers for installation.). Grayed=Default!


Default Item Select Delay
”Default Item Select Delay”

Sets the number of seconds to display the Windows Startup menu before running the default menu item. Default value is 30.


Default Menu
”Default Menu”

Sets the default menu item on the Windows Startup menu; the default is 3 for a computer with no networking components and 4 for a networked computer!


Windows SplashScreen
”Show Windows SplashScreen”

Enables display of the animated logo. Unchecking this also avoids hooking of a variety of interrupts that can create incompatibilities with certain memory managers from other vendors. Grayed=Default!


Enable Safe Mode With Networking
”Enable Safe Mode With Networking”

Enables Safe Mode With Networking as a menu option. This should be unchecked if network software components are not installed. Grayed=Default!


Boot Windows95 Operation System As Default
”Boot Windows95 Operation System As Default”

Enables Windows 95 as the default operating system. Unchecking this value is only usefull with MS-DOS version 5 or 6.xx on the computer. Grayed=Default!


Registered Owner
”Registered Owner”

The Name which this license of MS-Windows is registered to. You can enter a new name if you like!


Registered Organisation
”Registered Organization”

The Company which this license of MS-Windows is registered to. You can change the CompanyName if you like!


Product Id
”Product Id”

This identifies the product id of your Windows installation. It should be left intact as the serial number identifies the installation!!


Autoloading Drivespace
”Auto Load Drivespace”

Enables automatic loading of DRVSPACE.BIN. Grayed=Default!


Autoloading Doublespace
”Auto Load DoubleSpace”

Enables automatic loading of DBLSPACE .BIN. Grayed=Default!


Use 640K Memory For COMMAND.COM or DRVSPACE.BIN
”Use 640K Memory for COMMAND.COM or DRVSPACE.BIN”

Enables loading of COMMAND.COM or DRVSPACE.BIN at the top of 640K Memory. Unmark this value with Novell Netware or any other software that makes assumptions about what is used in specific memory areas. Grayed=Default!


Menu Show Delay
”Menu Show Delay”

This sets the Windows show delay for menus. The default value is 400Miliseconds


Enable Loading Of A DoubleBuffer Driver (SCSI)
”Enable Loading Of A Double-Buffer Driver For SCSI Controller”

Enables loading of a double-buffering driver for a SCSI controller. Checking this box enables double-buffering, if requested by the SCSI controller! Grayed=Default!


Add/Remove Folders
”Folders”

Click on a folder name to select it. Please note, that the first section are a foldername. You can edit an existing folder, create a new one, remove a damaged uninstall call or call the uninstallation routine directly from Wintrasher


Uninstall Program
”Uninstall Program”

When clicking you will activate the selected Win95 uninstall application. You can the chose to uninstall the program or cancel the command.


Remove Uninstall Folder
”Remove Folder”

Removing a folder doesn’t uninstall the program. It just removes the uninstall program from the Add/Remove panel, so use it with caution. This is usefull when an unstall program does not work anymore! Note: When accepting, these changes are immediate and can not be undone!


Create A New Uninstall Folder
”New Folder”

Insert a new uninstall program!

Note: When accepting, these changes are immediate and can not be undone!


Edit An Existing Uninstall Folder
”Edit Folder”

Edit an existing uninstall program. Be carefull using this, you might fuckup an uninstall routine!

Note: When accepting, these changes are immediate and can not be undone!


Show "Tip Of The Day"
”Show Tip Of The Day”

Show the Windows ‘Tip Of The Day’, at startup. If you disabled it, when installing Windows, you can enable it again!


Show "Click Here To Begin" Banner!
”Show Click Here To Begin Banner”

Show Animated “Click Here To Begin” banner, which pops up on the right side of the “Start” button.


Wrap Text On IconTitles
”Wrap Icon Titles”

Wrap text on icon titles. Minimize the textusage of the icontext by checking this!


Window Animation
”Window Animation”

Animate windows when they popup!


Show BMP Icons, As Minipictures
”Show Icons For Bmp As A Minpicture”

When watching an iconlist you can show the BMP-pictures on the icon, so you have a very small picture previewer!


Save Windows Settings On Exit
”Save Windows Settings”

If you like your settings and you don’t want to change them, you can disable the Windows Save-Settings here!


Beep On Errors
”Beep On Errors”

Enable Windows beep on errors!


Ok Button
”Ok”

Apply changes and exit WinTrasher!


Cancel Button
”Exit (Cancel)”

Exit (Cancel) changes! Note that not all functions can be undone!


Registering WinTrasher
”Register”

Enter registration form. When registered the nag screen is removed! Registration is for free!


The Registry Editor
”Registry Editor”

This will launch the Builtin Windows Registration Editor. With this program you can watch, and change a lot of the settings from programs and Windows itself. You can also make a complete backup of the Registry.

Use this program with caution.


Configuration Editor
”Configuration Editor”

The Configuration editor allows you to edit some of the startup files. You will get access to the DOS/WIN configuration files AUTOEXEC.BAT and CONFIG.SYS, where you for example can load your drivers. You can edit the WIN.INI and SYSTEM.INI which hold some of the Windows settings. Note that a lot of the old win.ini commands are now placed in the Registry.

And last you can change your protocols and mailsettings in PROTOCOL.INI and MSMAIL.INI.

Use this program with caution.


Make Compatible
”Make Compatible”

A small tool, to help old applications run under Windows95. When launching, WinTrasher will open a dialog, where you can select the file you wish to edit!


Tap/Ip Configuration
”Tc/Pip Configuration”

Here you can setup your Tc/Pip configuration.


Windows 95 Security System
”Win95 Security”

An integrated security add on, which allows you to set various security options in a controlled invironment like the one in Wintrasher. The program can be optained on the Internet, from the same location as WinTrasher.

Use this program with caution.


Clean History Lines Automaticly At Startup
”Clean At Startup!”

This will clean the checked histories at startup automaticly. Note Remember to disable this function before uninstalling WinTrasher!!


Delete Internet Cookies
”Delete Cookies At Startup!”

This will delete the Internetcookies at startup automaticly. Note Remember to disable this function before uninstalling WinTrasher!!


Delete Internet Cookies Automaticly At Startup
”Delete Internet Cookies!”

This will delete all Internetcookies..


Select Defaultuser At Startup
”DefaultUser At Startup!”

This will set the entered person as as default at systemstartup.


Select Defaultuser At Startup
”DefaultPassword At Startup!”

If a password is required for the Defaultuser, you can enter it here! Note that this password can be read with a registry editor!


Clean History Lines
”Clean (Now)”

Clear marked historylines. Note that some histories won’t be cleared until you restart Windows! You can also mark the box clean at startup, and Wintrasher will clean all the marked histories when Windows Starts!


Run History
”Run History”

History of runned files. Check this box and press clean to remove this history, and restart Windows!


Find Files History
”Find Files History”

History of found files. Check this box and press clean to remove this history, and restart Windows!


Recent Documents History
”Recent Document List”

History of viewed documents etc.. Check this box and press clean to remove the history!


Find Computers History
”Find Computers History”

History of found computers. Check this box and press clean to remove this history, then restart Windows!


Desktop Files
”Desktop Location”

Directory location of your Desktop.


Font Files
”Fonts Location”

Directory location of your Fonts.


The NetHood
”NetHood Location”

Directory location of your NetHood.


Programs Location
”Programs Location”

Directory location of your Taskbar StartMenu/Programs.


Recent Documents Location
”Recent Files Location”

Directory location of the recent viewed documents.


Setup Location
”Setup Path Location”

Sourcedirectory for the Windows installlation. Usually a CD-Rom.


SendTo Location
”Send To Location”

Directory location of the SendTo commands!


StartMenu Location
”Start Menu Location”

Directory location of the Taskbar StartMenu.


Startup Location
”Startup Location”

Directory location of the Windows autorun directory.


Template Files Location
”Templates Location”

Directory location of your Template files.